Window or Filters Modification Quote Request Form – Step 1 of 2

Please complete the form below to request a quotation for a customized window. First, type the stock number of the off-the-shelf window that is the closest match to your requested item so that it may be used as a reference window. Next, select the required anti-reflection, reflection, or filter coating. If a filter coating is selected, please provide the required coating parameters or a reference stock filter coating. After, fill in the finished part dimensions and check the box if edge blackening is needed to decrease stray light. Note: The thickness cannot be changed from the reference stock window thickness. Lastly, please provide the requested quantity, information about the application, and any additional requests or notes.

Please complete the form before continuing to the questionnaire. If you've filled out the form already and you're seeing this message, your page has been inactive for too long and your session has expired.
Stock number is required
Please specify a valid quantity.
Please specify if these products will be used in a defense, weapon, or nuclear application and/or should they be subject to U.S. ITAR controls.
Please specify if your application includes items that are for Dual Use or under Export Control
Please complete the reCAPTCHA.

*Reference Window Stock Number:

Anti-Reflection Coatings:

Reflective Coatings:

Filter Coatings:

Filter Coatings Parameters:

Edge Blackened:

Finished Part Dimensions

*Quantity:

*Will these products be used in a defense, weapon or nuclear application and/or should they be subject to U.S. ITAR controls?

*Does your application include items that are for Dual Use or under Export Control?

In what type of application will these products be used?

Comments/Notes

*Required

Typical Finished Part Specifications
Thickness	Based on the selected product.
Material	Based on the selected product.
Modified Dimension Tolerance	±0.1mm
Surface Quality	80-50
Clear Aperture	80% of outer dimension
Irregularity (Plano/Spherical)	Based on the selected product.
Bevel FW Tolerance	MIN = NONE, MAX = 0.5mm
Bevel Angle Tolerance	@45° ±15°
Edge Chips	≤0.5mm outside the clear aperture