• Country/Region
  •   
 

C, S, and T-Mount Components

Need Help?
Looking for
Custom Optics?

Category
    Function
    Type of Optics
    Thread Type
    Diameter of Compatible Optics (mm)
    Dimensions of Compatible Optics (mm)
    Min. Thickness of Compatible Optics (mm)
    Max. Thickness of Compatible Optics (mm)
    C, S, and T-Mount Circular Optic Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Circular Optic Mounts
    • Mounts for Simple Lenses, Achromats, Filters, or Reticles
    • Designed to Integrate with Any C, S, or T-Mount Components
    • Optic is Held in Place with Included Retaining Ring
    C, S, and T-Mount Extensions Tubes
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Extensions Tubes
    • Used for Adding a Fixed Tube Extension to Optical Systems
    • Feature Male/Female Threads at Opposite Ends
    • Black Anodized Aluminum Construction
    Acktar Hexa-Black™ C-Mount Noise Reduction Extension Tubes New
    ×
    Acktar Hexa-Black™ C-Mount Noise Reduction Extension Tubes
    • Acktar Hexa-Black™ Light Absorbing Technology
    • Reduce Stray Light and Noise in Imaging Systems
    • Near Zero Specular Reflectance at Grazing Angles
    • Stray Light Rejection Ratio up to 8 x 10-7
    C, S, and T-Mount Fine Thread Focus Tubes
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Fine Thread Focus Tubes
    • Finely Threaded Internal Barrel for Fine Focus Adjustments
    • Inner Diameter Baffle Thread for Stray Light Reduction
    • Knurled Lip on Female End for Controlled Adjustments
    C, S, and T-Mount Brass Spacer Rings
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Brass Spacer Rings

    • Fit Over Male C, S, and T-Mount Threads
    • Wide Range of Thicknesses Available for Accurate Spacing
    • Spacer Ring Kits Available

    C, S, and T-Mount Polarizer Holders
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Polarizer Holders
    • Integrate Polarizers into C, S, or T-Mount System
    • Provide Polarizer Rotation Up to 90° within Holder
    • Designed to Hold 12.5, 20, 25, or 50mm Diameter Polarizers
    • Adapters Available for Mounting 12.5 and 25mm Square Polarizers
    C-Mount Helicoid Barrels
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C-Mount Helicoid Barrels
    • Compatible With 12.5mm, 15mm, and 25mm Diameter Optics
    • Male and Female C-Mount Threads
    • Provides Linear Travel Without Rotating Optical Components
    C and T-Mount Motorized Shutters C and T-Mount Motorized Shutters
    • Male and Female C- and T-Threads for Easy Integration
    • Simple On/Off Operation with TTL Input
    • M6 and ¼-20 Tapped Holes for Post Mounting
    C, S, and T-Mount Iris Diaphragm Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×
    C, S, and T-Mount Iris Diaphragm Mounts
    • Variable Apertures for C, S, and T-Mount Systems
    • Male and Female Thread at Opposite Ends for Easy Integration
    • Adjusted via Rotating Ring or Lever for Precision Control
    Achromat Prototyping System
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    Achromat Prototyping System
    • Imaging Lens System for Prototyping
    • Ideal for Identifying Desired Magnification and f/#
    • Compatible with Helicoid Barrel for Use With C-Mount Cameras
    Tube System Fiber Connector Adapters
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×
    Tube System Fiber Connector Adapters
    • C-Mount, S-Mount, ID1, and ID05 Threading
    • Low Profile Designs for Minimal System Intrusion
    • Available for SMA, FC, FC/APC, or ST Fiber Connectors
    Manual Cage Filter Wheel Manual Cage Filter Wheel
    • Cage and Tube System Compatible
    • Holds 25mm Filters
    • 6 Discrete Positions
    C-Mount Filter/Polarizer Holder
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C-Mount Filter/Polarizer Holder
    • Optic Cells Can Mount Square or Circular Optics
    • Complete Holder Requires One Housing and One Optic Cell
    • Available with M6 or ¼-20 Tapped Holes for Post Mounting
    C, S, and T-Mount Cube and Plate Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Cube and Plate Mounts
    • C, S, and T-Mount Solutions for Mounting Cube and Plate Beamsplitters, Filters, and Mirrors
    • Provides a 90° Mounting Interface
    • ¼ -20 and M6 Tapped Mounting Threads for English or Metric Based Systems
    C, S, and T-Mount Kinematic Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Kinematic Mounts
    • Allow for Kinematic Adjustment of C, S, and T-Mount Components
    • Horizontal Mounting Adapters Available
    • Removable Turning Knobs for Hex Key Access
    90° Kinematic Adapter
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    90° Kinematic Adapter
    • C-Mount and Cage System Compatible
    • M6 Mounting Hole
    • Compatible with Most TECHSPEC® Kinematic Mounts
    C and T-Mount Component Kits
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×
    C and T-Mount Component Kits
    • C and T-Mount Components Ideal for System and Prototype Design
    • Allow for Integration into Tube and Benchtop Systems
    • Includes Compact Wooden Case for Ease of Storage and Organization
    C, S, and T-Mount Ring Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Ring Mounts
    • Allow for Post Mounting C, S, and T-Mount Tube System Assemblies
    • ¼-20 or M6 Tapped Mounting Options
    • Black Anodized Aluminum Construction
    C, S, and T-Mount Thread Adapters
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C, S, and T-Mount Thread Adapters
    • Adapt All Available Tube System Thread Types to One Another
    • Low Profile Design to Minimize Extension Length
    • Black Anodized Aluminum Construction
    C, S, and T-Mount Double Thread Rings
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×
    C, S, and T-Mount Double Thread Rings
    • Maximize C, S, and T-Mount Tube Connection Compatibilities
    • Female or Male Thread Options
    • Rotating Rings Also Available
    Machine Vision Adapters for C and T-Mount Components New
    ×
    Machine Vision Adapters for C and T-Mount Components
    • Integrate C and T-Mount Components into Imaging Systems
    • Compatible with M22.5 to M40.5 Machine Vision Threads
    • Step-Up Design Prevents Vignetting
    C and T-Mount to Objective Adapters
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C and T-Mount to Objective Adapters
    • Integrate Microscope Objectives to Create Digital Microscope Systems
    • Feature Male C and T-Mount Thread and Female Objective Thread
    • Black Anodized Aluminum Construction
    C and T-Mount Light Guide Mounting Adapters C and T-Mount Light Guide Mounting Adapters
    • Adapt Light Guides to Optical Components
    • C-Mount and T-Mount Versions Available
    • Articulating Arm Package Available
    C and T-Mount Eyepiece Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    New
    ×
    C and T-Mount Eyepiece Mounts
    • Integrate Eyepieces into C and T-Mount Systems
    • Feature Male C and T-Mount Thread
    • Black Anodized Aluminum Construction
    C and S-Mount Diode Mounts
    TECHSPEC® components are designed, specified, or manufactured by Edmund Optics. Learn More
    C and S-Mount Diode Mounts
    • C and S-Mount Thread for Easy Integration
    • Low Profile Designs for Minimal System Intrusion
    • Accepts Common Laser Diodes or Photodiodes

    View all Resources Related to C, S, and T-Mount Components  


    Have a question? Need support?
    Ask an engineer.

    (+65) 6273 6644 Live Chat

    You may also fill out the below form and we will contact you:

    ×

    Need a Quote? Add a stock number to begin our two-step quote process.

    Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram

    ×