Cyber Sale Optomechanics!

• Preloaded Ball Bearing Design for Low-Friction Linear Adjustment
• Solid-Top and Thru-Hole Versions
• English or Metric Micrometer Drive and Fine Screw Drive Available
• Stackable for 2-Axis or 3-Axis Movement

• 1” Diameter Posts with Metric and English Mounting Hole Options
• Stainless Steel Construction for High Stability
• 0.5”- 4.0” Heights Available
• Refer to the Technical Information Tab to Find the Right Adapter for your Optical Mount and Application

• Carriers Feature One or Two Knobs, with English or Metric Mounting Hole Patterns
• Available with Both English and Metric Track Lengths
• Preassembled Common Carrier and Track Combinations are Available
• Vernier Scales of 0.01” or 0.1mm Resolution

• Provide Rigid Support for Cage System Structure
• Polished 440 Stainless Steel for High Durability and Smooth Motion
• Variety of Lengths for a Range of Applications
• 6mm Cage System Rods Also Available

• Cage Rods Provide Rigid Support for Cage System Structure
• Polished 416 Stainless Steel for High Durability and Smooth Motion
• M3 Mounting Holes in Each End
• 3mm Cage System Rods Also Available

• Used to Adjust f/#, Field Stop Diameter, and Overall Light Throughput
• Mounted Version Features a Tapped Hole for Post Mounting
• Abundant Types for Varying Applications

• Four Sizes Ranging from 30 x 30mm to 125 x 125mm
• English and Metric Hole Patterns Available
• Micrometer and Lead Screw Drive Options
• Easily Configured into X-Y and X-Y-Z Configurations

• Low Reflectance from the EUV to SWIR
• 99% Absorbance Blackening Coating
• Aperture Sizes from 20 to 1000μm
• Available Unmounted and Mounted

• Provide Stable Platform for Experiments and Test Configurations
• 1/4-20 TPI or M6 Tapped Holes for Various Mounting
• Black Anodized Aluminum

• Preloaded Ball Bearing Design for Low-Friction Linear Adjustment
• Solid-Top and Thru-Hole Versions
• English or Metric Micrometer Drive and Fine Screw Drive Available
• Stackable for 2-Axis or 3-Axis Movement

• Fast Accurate Repeatable Motion
• Dual Control Gear and Lever Mechanics
• Removable Pin for OEM Integration
• Anti-Reflection (AR) Leaves Available
• Iris Diaphragm Mounts and Motor Sold Separately

• Iris Completely Closes
• Corrosion Resistant Housing
• High Heat Resistance
• Burnished Spring Steel and Stainless Spring Steel Leaf Options Available

• Mounts for Simple Lenses, Achromats, Filters, or Reticles
• Designed to Integrate with Any C, S, or T-Mount Components
• Optic is Held in Place with Included Retaining Ring

• Used for Adding a Fixed Tube Extension to Optical Systems
• Feature Male/Female Threads at Opposite Ends
• Black Anodized Aluminum Construction

• Simple Mounting Arrangement
• Metric and English Configurations
• Black Anodized Aluminum Construction
• Posts and Post Holders Required for Mounting

• Ceramic, Copper, Gold-Plated Copper, Molybdenum, or Tungsten Substrates
• Withstand High Power Densities up to 130MW/cm² (For Mo and W Substrates)
• Ideal for Spatial Filtering and Laser Aperturing

• Multiple Configurations Available
• High Load Capacity
• Ideal for Applications Requiring Long Travel
• Additional Rack and Pinion Stages Available

• Mounted Version Provides Secure Mechanical Support
• Used in Optical Systems and Educational Efforts
• Ideal for Spectrophotometer Image Analysis

• Ideal for Use with Our English Sized Positioning Equipment
• A Broad Selection of Sizes Available
• 50 Pieces per Package
• Socket Head Cap Screw Kits Available
• Allen Wrenches Also Available

• Coarse and Fine Movement Available
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• Twin Ring Mount Design
• Fixed and Adjustable Versions
• Ideal for He-Ne Lasers
• Posts and Post Holders Required for Mounting

• Fit Over Male C, S, and T-Mount Threads
• Wide Range of Thicknesses Available for Accurate Spacing
• Spacer Ring Kits Available

• Aluminum Stage with Brass Rack and Pinion
• 20mm Travel per Knob Rotation
• Scale Features 1mm Increments with Locking Lever
• Basic Rack and Pinion Stages Also Available

• English and Metric Post Adapters
• Customizable Blank Disks
• Reducing Rings

• Available in Aperture Mounts for a Secure Mechanical Support
• Pinhole Sized Ranging from 1 to 1,000 Microns
• High Power Apertures Available

• 1.0” or 1.5” Square Mounting Surface
• Two Fine Adjustment Screws (64-Pitch) Allow for Tilting
• Models with Pre-Mounted λ/4 Mirror Available
• Straight or Angle Configuration Options Available

• Fine Micrometer Movement
• Available in Four Sizes
• Black Anodized Aluminum
• Locking Knob

• Precision Micrometer Drive and Manual Drive Options
• 360° Coarse Rotation
• Micrometer Drive Models Provide ±5° Fine Rotation
• Black Anodized Aluminum Construction

• Rails and Carriers Available
• Mount on English and Metric Breadboards
• Low Profile Design

• Coarse or Fine Motion Available
• Thru Holes for Integrating Lenses
• ¼-20 Stud for Mounting Cameras
• Imaging System Bases, Stainless Steel Posts, and Accessories also Available

• Mount and Set in Unique Orientations
• Mix and Match for Custom Mounting Combinations
• Lockable Angular Positioning

• Micrometer with Separate Piezo Actuator for Fine Adjustment
• 40 x 40mm and 70x70mm in English and Metric Hole Patterns Available
• Easily Assembled into X-Y and X-Y-Z Configurations

• Stainless Steel Construction for up to 20kg Load Capacity
• Provides Excellent Temperature and Straight-Line Stability
• Compatible with all TECHSPEC Manual Stages

• C-Mount Tube System Compatibility for Creating Modular Microscope System
• Four Objective Positions
• Mitutoyo and Nikon Objective Compatibility

• Compact Overall Size for System Integration
• Brass Construction for High Stiffness and up to 15kg Load Capacity
• Compatible with All TECHSPEC® Stages

• 2-Axis, 3-Axis, and 5-Axis Adjustable Mounts Available
• Options for 12.5mm (0.5”), 25mm (1”), and 50mm (2”) Dia. Optics
• M6 Mounting Threads

• C and S-Mount Thread for Easy Integration
• Low Profile Designs for Minimal System Intrusion
• Accepts Common Laser Diodes or Photodiodes

• Integrate Polarizers into C, S, or T-Mount System
• Provide Polarizer Rotation Up to 90° within Holder
• Designed to Hold 12.5, 20, 25, or 50mm Diameter Polarizers
• Adapters Available for Mounting 12.5 and 25mm Square Polarizers

• Finely Threaded Internal Barrel for Fine Focus Adjustments
• Inner Diameter Baffle Thread for Stray Light Reduction
• Knurled Lip on Female End for Controlled Adjustments

• Four Sizes Ranging from 30 x 30mm to 125 x 125mm
• Thru-Hole Design for Optical Path Transmission
• English and Metric Hole Patterns Available
• Micrometer and Lead Screw Drive Options

• Locking Knobs for Secure Positioning
• 0.5mm Travel per Knob Rotation
• Available with up to 15mm Travel in X and Y with 12mm Travel in Z

• Compatible with 30mm, 40mm, 70mm and 125mm TECHSPEC® Crossed Roller Translation Stages
• Compatible with Rotary and Tip-Tilt TECHSPEC® Stages
• Used to Configure Stages into X-Y-Z Configurations
• Black Anodized Aluminum Construction

• Three Sizes Available
• Mates With Metric Posts Using Adapter #55-036
• Slotted Design for Both Metric and English Breadboards
• Mounting Holes Designed for Our Metric Line of Components
• Black Anodized Aluminum Construction

• Large 200mm x 120mm Size Plate Set
• 20mm Diameter Stainless Steel Posts with Male and Female M6 Threads
• Use with Lab Jacks to Extend Working Surface

• Robust Kinematic Mounts for Larger Diameter Optics
• Ball Pivot and Fine Pitch Screws Provide Pitch and Roll
• 50% Greater Resolution than Micrometer Adjustments

• Two-Axis Tilt Control
• 25mm Square Mounting Surfaces
• Back or Top Screw Options
• Slotted or Threaded Based Options
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• 8-32 or M4 Mounting Options Available
• Up to 19mm of Linear Travel
• Three-Start Screw Drive and Precision Lapped Surfaces for Smooth, Accurate Movement

• High Straight Line Accuracy
• Low Wear, Low Friction Sliding Motion
• Preloaded to Eliminate Wobble and Unwanted Play

• Robust Mounts for Larger Diameter Optics
• ¼-20 Mounted Hole for Post Mounting
• Thread into Optical Cell Kinematic Mounts to Add Tip/Tilt Adjustment

• Micrometer or Lead Screw Driven Tip-Tilt Adjustment
• Color Coded Knobs for Tip and Tilt
• Set Screws and Delrin® Pads Hold Optical Component in Place
• Posts and Post Holders Required for Mounting

• Common 25.4mm (1") Platform Height
• Removable Top Plates with High Repeatability Kinematic Positioning
• Compatible with all with TECHSPEC Stages

• Gimbal Movement for Precision Tip and Tilt Alignment
• Compatible with 4”, 4.25”, 6”, 8", 10" and 12” Diameter Optics
• Designed for Flat Mirrors
• Direct Mounting to English and Metric Breadboards for System Integration
• Precision Gimbal Mounts for Smaller Optics Also Available

• On/Off Magnet for Easy Placement on Lab Bench
• Low Profile 20mm Height
• Compatible with TECHSPEC Stages

• 120° Clear Edge for Mounting Beamsplitters and Transmissive Optics
• Economically Priced
• Essential Mounts for Experiments and OEM Systems

• Ideal for Ball Lenses and GRIN Lenses as small as 1mm Diameter
• Spring-Loaded to Hold Small Diameter Optics
• 1” Offset Design Allows Easy Placement with Shorter FL Lenses
• 1/4-20 TPI Mounting Thread

• Compatible with Our TECHSPEC® Manual Translation Stages for Additional Axis Alignment
• ±12.5mm or ±35mm Travel in Both X and Y for Quick X-Y Positioning
• Universal Bottom Plate for Both English and Metric Breadboard Mounting

• Adapt All Available Tube System Thread Types to One Another
• Low Profile Design to Minimize Extension Length
• Black Anodized Aluminum Construction

• Integrate Microscope Objectives to Create Digital Microscope Systems
• Feature Male C-Mount, T-Mount, or ID1 (SM1) Thread and Female Objective Thread
• Black Anodized Aluminum Construction

• C, S, and T-Mount Solutions for Mounting Cube and Plate Beamsplitters, Filters, and Mirrors
• Provides a 90° Mounting Interface
• ¼ -20 and M6 Tapped Mounting Threads for English or Metric Based Systems

• Allow for Post Mounting C, S, and T-Mount Tube System Assemblies
• ¼-20 or M6 Tapped Mounting Options
• Black Anodized Aluminum Construction

• C-Mount, S-Mount, SM1, and SM05 Threading
• Low Profile Designs for Minimal System Intrusion
• Available for SMA, FC, or FC/APC Fiber Connectors

• Maximize C, S, and T-Mount Tube Connection Compatibilities
• Female or Male Thread Options
• Rotating Rings Also Available

• High Precision Piezo Stages
• Stick-Slip Designs
• Ultra-Fine Control

• Compact Design with Built-In Translation Assembly
• Configurable for ½" or 1" Travel
• Accepts Micrometers with 3/8” Shank
• Step-by-Step Assembly Instructions Available

• Ideal for Intersecting Multiple Optical Paths
• Feature M23.2 or M27.5 Threading for Integration with Cage System Tubes
• End Caps Block Unused Optical Paths

• Available for a Range of Diameters
• Fits within 25mm or 30mm Cage System Plates
• Ideal for Securing Mounted Optics or Laser Diode Modules

• Enable Adjustment of Cage System Length
• Locking Ring for Easy Length Adjustment
• M23.2 x 0.75 Threading
• Combine with Thread Adapters to Join Multiple Fixed Extension Tubes

• Available for a Range of Optical Lens Diameters
• Adds Additional Adaptability to Cage System
• Retaining Ring Included

• Metric and English Hole Patterns Available
• Stackable for Two-Axis Rotation
• Mechanically Compatible with our TECHSPEC® Stages

• Metric and English Hole Pattern Versions Available
• Tilt Control in Two Axes (Kinematic Movement)
• Precision Micrometer Drive
• Mechanically Compatible to Other TECHSPEC® Stages

• USB or RS-232 Interface
• Bi-Directional Movement
• C-Mount and T-Mount Adapters Available

• Micrometer, Fine Screw, Digital and Differential Options Available
• Compatible with our Ball Bearing Stages

• Corrosion and High Temperature Resistance Housing
• Anti-Reflective (AR) Spring Steel or Burnished Spring Steel Leaf Options Available
• Mounted Version Features both an English and Metric Tapped Hole for Easy Post Mounting

• Holds Six or Twelve Filters
• Accepts 1" / 25mm or ½" / 12.5mm Diameters
• 12 Index Positions for Precise Movement

• FC Fiber Connection
• Two Axis Linear Movement for Precise Fiber Alignment
• Optional Kinematic Tilt Version
• Posts and Post Holders Required for Mounting

• X-Y Micrometer Translation
• Gimbal Tilt Control for Fiber Alignment
• Z-Axis Translation for Objective Mount

• Contains Natural Rubber Latex
• Reduce Ambient Light and Glare Reflections 
• Assure Proper Eye-to-Lens Positioning  

• English and Metric

• Manual 360° Rotation
• Locking Thumb Screw for Secure Positioning and Alignment
• Compatible with T-Mount Optic Mounts

• Posts for Integration into Imaging Systems
• Vertical Posts Thread to Bases and Platforms
• Horizontal Arms Thread to Posts and Microscope Head Mounts
• Rack and Pinion Focusing Mounts, and Accessories also Available

• Two Micro Sizes Available
• Versions with Covered Rails
• Three Travel Selections
• X, XY, and XYZ Axis Models

• Crossed V-Groove for Centering Optics Vertically and Horizontally
• Mount Optics up to 118mm Diameter
• M6 x 1.0 or ¼-20 TPI Mounting Thread for Post Mounting Applications

• Variety of Standard ¼-20 Hardware
• Delrin Washers, Phillip Screws, Set Screws, Thumb Screws, SHCS, and More
• #55-192 1/8" Hex Size Allen Wrench used with ¼-20 Socket Head Set Screws

• Ideal for use with Post and Post Holder Applications
• Features ¼-20 Male/Female Threads
• Rotates 360° and Includes Locking Set Screw

• Precision Fine Movement
• Holds Prisms up to 30mm
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• Allows Stacking of 3 or 5 Filters
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• Non-Marring Surface
• 3 Sizes Available
• M6 x 1.0 mounting hole
• Black Anodized Aluminum
• Posts and Post Holders Required for Mounting

• 50mm Diameter Optical Mount
• Includes Durable Mounting Base
• Helical Rack and Pinion Drive Mechanism

• Standard and Deluxe Versions Available
• ¼-20 Mounting
• Compatible with our Most Popular Line of Boom Stands

• Male to Female Thread Design
• Ideal for Mating Optical Mounts and Components
• For use with ¼-20 or M6 Breadboard Applications

• Provide Total Light Extinction When Closed
• Aperture Sizes Up to 75mm
• Mounted Options Available

• 0.001mm Resolution Directly Readable Micrometer
• Readout in Inches or Millimeters
• Available with English or Metric Mounting Holes

• X-Y Adjustable
• Pre-Mounted on a Gimbal Tilt-Table
• Open-Style Design

• Stand Alone Jaw Clamp Mounts (8-32 Mounting) or with Kinematic Frame
• Accepts up to 4-¼" Diameters
• Fine Angular Resolution Kinematic

• Variety of Bases Available
• Stand-Alone or Benchtop Compatible Bases
• Designed for Use with 0.75" Stainless Steel Posts
• Rack and Pinion Focusing Mounts, and Accessories also Available