0.2 x 40° Diffusing Angle 2" x 2" Unmounted

Angle Tolerance (°):

±1 x ±4

Diffusing Angle (°):

0.2 x 40 (FWHM)

Damage Threshold, Pulsed:

0.22 J/cm² @ 1064nm, 10ns (typical)

Dimensional Tolerance (mm):

±0.5

Dimensions (inches):

2 x 2

Dimensions (mm):

50.8 x 50.8

Operating Temperature (°C):

-30 to +100 (Maximum of 240 Hours)

Substrate:

Polycarbonate

Thickness (mm):

0.78

Transmission (%):

>85

Type:

Holographic Diffuser

Wavelength Range (nm):

400 - 1600

Construction:

Unmounted

Regulatory Compliance

RoHS 2015:

Compliant

Reach 205:

Compliant

Product Family Description

Transmission Efficiency >85%
Elliptical and Circular Diffusing Outputs
Ideal for Visible and Near-Infrared Applications
UV Holographic Diffusers Also Available

Holographic Diffusers are used to control the diffuse area of illumination and increase transmission efficiency to greater than 90% from filament lamps, LEDs, arc lamps, and other sources. Standard ground glass and opal glass will produce diffuse illumination, but the diffuse light area will often exceed the requirements of the system. This over-illumination, associated with traditional diffusers, reduces efficiency and can often lead to added costs by requiring higher power illumination sources, lenses, and possibly filters. It is important to note that diffusing angles are given for a collimated input beam and angular divergence will vary for different incidence angles.

Unlike many holographic elements, these specific polycarbonate components can be used throughout the visible and near-infrared. Available individually, as umounted sheets, or in sets of four filters. Holographic Diffusers can be cleaned with a de-ionized water rinse, followed by a forced air drying. Wipe gently with lens tissue soaked with methanol, followed with a forced clean air or nitrogen drying. Holographic Diffusers are resistant to methanol and methylene chloride.