Edmund Optics uses cookies to optimize and enhance the features and content on our website. By continuing to use this website, you consent to our use of cookies.

  • My Account
  •   
 
See all 8 Products in Family

25mm Dia. BaF2, IR Holographic Wire Grid Polarizer

25mm Dia. BaF<sub>2</sub>, IR Holographic Wire Grid Polarizer, #62-770

25mm Dia. BaF2, IR Holographic Wire Grid Polarizer, #62-770

Stock #62-770
A$2,096.00
×
Qty 1-5
A$2,096.00
Qty 6
A$1,758.40
Volume Pricing
Request a Quote
Operating Temperature (°C):
-20 to 75
Substrate:
Barium Fluoride (BaF2)
Thickness (mm):
2.00
Clear Aperture CA (mm):
18.0
Diameter (mm):
25.00
Extinction Ratio:
150:1 @ 3µm, 300:1 @ 10µm
Construction:
Wire Grid
Wavelength Range (nm):
2000 - 12000
Dimensional Tolerance (mm):
±0.2
Minimum Transmission (%):
>65
Polarization:
Notches on polarizer ring are aligned with wires of wire grid
Surface Flatness:
λ/20 @ 10.6μm
Angle of Incidence (°):
0
Damage Threshold, CW:
50 W/cm2
Groove Density (grooves/mm):
2700.00
Groove Parallelism to Edge (°):
N/A
Housing:
Black Anodized Aluminum
Mount Thickness (mm):
5.0 +0.2/-0.1
Type:
Linear Polarizer
Parallelism (arcmin):
≤3
Ring Thickness (mm):
±0.1 Ring Thickness
Wavelength Range (μm):
2 - 12

Regulatory Compliance

RoHS:

Product Family Description

  • Designed for Wavelengths Ranging from 2 - 30μm
  • Holographic Polarizers Available in Many Substrates
  • Ruled Polarizers Ideal for High-Power Lasers
  • 360° Rotation Using Metric Polarizer Mounts

Infrared (IR) Wire Grid Polarizers are used to polarize light from unpolarized infrared laser sources, as well as attenuate light from polarized ones. When two wire grid polarizers are used together, high extinction ratios greater than 40,000:1 can be achieved. The polarization axis of each polarizer is marked by two white lines etched into the surface of its protective ring. We offer both ruled and holographic configurations.

Holographic Wire Grid Polarizers

Holographic wire grid polarizers are manufactured by a special holographic technique that creates sub-micron wire grid spacing. Compared to conventional ruled wire grid methods, the holographic method creates finer groove spacing which optimizes short wavelength performance. We offer holographic wire grid polarizers of Barium Fluoride (BaF2), Zinc Selenide (ZnSe), Thallium Bromoiodide (KRS-5), and Germanium (Ge).

Ruled Wire Grid Polarizers

Ruled wire grid polarizers are available on Calcium Fluoride (CaF2) and Zinc Selenide (ZnSe). Ruled holographic gratings feature precisely spaced grooves formed directly on the surface of the substrate. The ruling process forms sharp, well defined peaks which are then coated with aluminum by vacuum deposition at an oblique angle. The direct ruling and coating process results in a series of closely spaced, highly conductive wires with a high extinction ratio and an inherently high damage threshold.

Note: Special care should be taken when handling KRS-5 and Zinc Selenide as they are toxic materials. Always wear rubber or plastic gloves to avoid risk of contamination.

Need a Quote? Add a stock number to begin our two-step quote process.

Edmund Optics Facebook Edmund Optics Twitter Edmund Optics YouTube Edmund Optics LinkedIn Edmund Optics Instagram

×